From Impact I clicked on "Create Prom File" and a window called "Prom File Formatter" appears in the work window.
Select Xilinx Flash/PROM in the first Pane and click on Arrow
Platform Flash, XCF04 then Add Storage Device and click on Arrow
Output filename: pfile01, File Format MCS, No other Data Files and Click on OK
New window appears with ADD Device and I clicked OK and added my bit file and selected no more files to add
and a graphic appeared with a Xilinx PROM and an arrow pointing to my FPGA.
What do I do next??
---------- Post added at 00:09 ---------- Previous post was at 00:07 ----------
Oh, I forgot, I clicked on Generate and got the reply "Generate Succeeded". But I can't find that file anywhere.
---------- Post added at 00:13 ---------- Previous post was at 00:09 ----------
Well I'm getting closer. I went back to boundary scan and double clicked on the PROM and selected the new file: pfile01.mcs. Then I turned the PROM green and tried to program it but I got "PROGRAM FAILED" :-(
---------- Post added at 00:17 ---------- Previous post was at 00:13 ----------
OK I realized that I had selected the wrong part so I fixed that and the program SUCEEDED finally. I have all three jumpers on for Master Serial. IS that correct?
Also, do I need to press the PROG button or what?
---------- Post added at 00:33 ---------- Previous post was at 00:17 ----------
I tried verifying my code in the FLASH PROM and it verified correctly. However nothing happens when I press the program button and the LED does not ever come on unless I program the FPGA directly with USB. I have all three jumpers in place.