Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Linux & macOS support for RTL8722DM

Status
Not open for further replies.

crabbyhead

Newbie level 6
Joined
Feb 28, 2020
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
201
Hello everyone,

Realtek's RTL8722DM development board is now supported in the Linux and macOS operating systems. You can now program and flash the RTL8722DM in all three operating systems, using either the Arduino IDE or the SDK with GCC.
MacOS-Ready-800x396.png


The RTL8722DM is an IoT-ready MCU powered by an ARM Cortex-M4 core at up to 200MHz coupled with a Cortex-M0 core at up to 20MHz.
It includes support for standard MCU features such as UART / I2C / SPI / ADC / PWM / GPIO interfaces, as well as dual band WiFi connections at both 2.4 GHz and 5 GHz, and BLE 5.0 connections.

More information on RTL8722DM capabilities can be found at:
https://www.amebaiot.com/en/amebad/

Join in the community discussions at:
https://www.facebook.com/groups/AmebaIoT/
https://forum.amebaiot.com/

Purchase links for the various Realtek development boards can be found at:
https://www.amebaiot.com/en/where-to-buy-link/
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top