Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
The usual method is to use a dds and make small steps in frequency for short times. This produces a stair step that is close enough to a ramp. One thing to look out for is whether you sweep up or down. One of the ways is better than the other, but I cannot remember which or why.