Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Li-ion cell charger 2x18650

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


This charger bases on microchips MCP73831. Maximum power current for one chip is 500mA.
Those chips were chosen because of their quite easy to solder housing. The charger is typical MCP73831 application. The plate was made by thermotransfer method. Bodies for the chargers are made of broken ones bought on an auction.
The charger is supplied by the pulse power supply plug 5V 2A.
MCP73831 has two signalling diodes and when the FULL diode is lit, the charger has finished both phases CC and CV and the accumulator is 100% charged.



Link to original thread – Ładowarka Li-ion 2x18650
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top