Learning L-EDIT (Tanner EDA). Please Help.

[xstal]

l-edit learn

Hello Friends,

Basically I am into FPGA Design. I want to learn Layouts of my own using Tanner's L_EDIT. I have no other tool available except L-EDIT. I have the PDFs for L-EDIT but I am not able to understand anything out of it.

First I want to make the layouts of all basic gates. Please help me to understand the Tool Flow and how to start working with this tool.:|

Thanks in anticipation

 

[vlsi_whiz]

l-edit basic

Hi,

To learn layout using L-Edit you can get this book:

Physical Design of CMOS Integrated Circuits using L-Edit by John P. Uyemura.

The book may be available at EDAboard.

You can also try out the tutorial at this site:

www.lems.brown.edu/en160/tutorials/ledit_tutorial.htm

Hope this helped.

 

[p_shinde]

l-edit basic tutorial

start to do a layout for a simple inverter..........clear DRC's in that.........

 

[xstal]

inverter using l-edit

Thankyou for the info,

I hope the link is quite useful for startup. I will try to find the book on this board. Meanwhile if anybody can upload the same book it will be a great help.

Thanks once again.

 

[tieuquaybk]

tanner eda 13

this is a basic book