Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Lead acid battery...

Status
Not open for further replies.

brian25

Member level 2
Member level 2
Joined
Feb 18, 2013
Messages
52
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Visit site
Activity points
1,601
is it safe to charge a 12v lead acid battery with 16v?
 

is it safe to charge a 12v lead acid battery with 16v?

Basically, it takes around 14V to charge a 12V battery, so its yes but to be at safe side, you will need a charge controller whereby it controls the charging current into the battery to prevent the battery from overcharged.

- - - Updated - - -

Charging directly with 16V can be dangerous as there is no charging control.
 
  • Like
Reactions: brian25

    brian25

    Points: 2
    Helpful Answer Positive Rating
Typical battery charger uses a 12V, 25W lamp as a series resistor. This way battery voltage cannot reach more than ~13.5 V while charging. No more regulation is needed and you can use your 16 V power supply. Make sure the supply can deliver at least 5-6 A into a discharged battery.
 
  • Like
Reactions: brian25

    brian25

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top