Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Laminator for PCBs – self construction

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


It is a laminator that can also be useful in thermal transfer, because of the thermostat working at two temperatures. The idea of making this device was taken from:

Elportal - Przyjazny Portal Elektroniki dla Wszystkich ::

The board was self made. The thermostats are set on 120 and 180 degrees Celsius and they can be selected by the switch. The middle position is used for cooling the rollers. The boards made with the laminator are very good and reproducible.



Link to original thread – Laminarka do płytek PCB
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top