Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

kool mu torroid Flux density value?

Status
Not open for further replies.

cupoftea

Advanced Member level 5
Joined
Jun 13, 2021
Messages
2,600
Helped
54
Reputation
108
Reaction score
115
Trophy points
63
Activity points
13,628
Hi ,
Do you agree that the Mag Inc Kool mu torroid 0076076A7 has a B value of 0.455 when it has 15.4A of current flowing in it?
....This is for 2 stacked 0076076A7 torroids, with 42 turns around the 'couplet'.
Working as attached.

Mag Inc Kool mu torroid 0076076A7 datasheet

The calculation has been done using the "bit by bit" method...... that is, increment H by even , small steps, calculate dH as you go, then dB = uo.ur.dH........then accumulate all the little dB values and read off what you have for B(total) at 15.4A.

(BTW, ur is recalculated at every H value...from the reluctance)
 

Attachments

  • Kool mu _0076076A7.zip
    46.4 KB · Views: 70

To get the answer directly, you'll review the DC magnetization curve in Magnetec databook. I read a B value of about 0.47 T.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top