Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

K-150 microcontroller 'the board is not responding'

Status
Not open for further replies.

AboudaKing

Member level 1
Member level 1
Joined
May 22, 2019
Messages
37
Helped
0
Reputation
0
Reaction score
1
Trophy points
8
Activity points
234
hello!
I'm using K-150 programmer to load .HEX file pic16f877A 'supported by the programmer'
Device using PL2303HXA
I'm using WIN10 64bit OS , already managed to solve the PORT identification but still not able to load the .HEX file into PIC
I changed the port , Unplug the programmer reconnect the USB cable as mentioned in Manuel but nothing changed
any solution for tis problem ?
1651419398493.png
1651419949337.png
 

hello!
I'm using K-150 programmer to load .HEX file pic16f877A 'supported by the programmer'
Device using PL2303HXA
I'm using WIN10 64bit OS , already managed to solve the PORT identification but still not able to load the .HEX file into PIC
I changed the port , Unplug the programmer reconnect the USB cable as mentioned in Manuel but nothing changed
any solution for tis problem ?
 

Attachments

  • Screenshot_2022-05-01-16-25-51.png
    Screenshot_2022-05-01-16-25-51.png
    119.8 KB · Views: 239
  • Screenshot_2022-05-01-16-26-03.png
    Screenshot_2022-05-01-16-26-03.png
    100.3 KB · Views: 228

I am in the same situation as you
I don't know if you already know how to fix this error
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top