Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

JTAG for ARM AT91SAM7X128

Status
Not open for further replies.
M

Mazi3

Advanced Member level 4
Joined
May 29, 2002
Messages
101
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,298
Location
Europe
Activity points
960
at91sam7x128 programmer

Hello,

iz there any GNU (read: free) software, that can program flash over JTAG interface? windows plattform is welcome :) Also appropriate schematics (wiggler?).

Regards, Matjaz
 

hi thanks for info, I also already found the wiggler JTAG interface, but what about software for flashing? this chips from atmel are quite new, that is the problem :)

well they seems very nice becouse of embedded flash, ram and ethernet :)
 

look the following program with Wigler !
Perhaps ...........working :!:

GSP Patel
 

iransatforum said:
look the following program with Wigler !
Perhaps ...........working :!:

GSP Patel
Click to expand...

This is very old (ver. 1.26) , cracked Macraigor Flashprog ......
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top