Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ISP Programmer1.2.0.55 Programming Error

Status
Not open for further replies.
xpress_embedo

xpress_embedo

Advanced Member level 4
Joined
Jul 5, 2011
Messages
1,154
Helped
161
Reputation
396
Reaction score
189
Trophy points
1,353
Location
India
Activity points
10,591
I am using ISP Programmer1.2.0.55, but it is not programming my AT89S8253 micro-crontroller...
My Circuit is little bit complex and when i burn my code it gives some error like

Write Error at address some_address, i don't know what to do know.. can any one help me..


Regards

Arun Sharma
 

How programmer works/programming with other chips?


What chip you use for programmer (what code) ?

You can use 74LVC244, 74HC244, must be low voltage.

But you cant use HCT, he works with 4,5V and up.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top