Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Is it possible to dial cell phone using PIC?

Status
Not open for further replies.
V

vadon

Guest
I am plannig to dial cell phone and send sms message by using PIC. I will use Ericsson GA628 for this purpose. Any help needed. Please?
 

mitesh

Full Member level 3
Joined
May 13, 2002
Messages
177
Helped
14
Reputation
28
Reaction score
7
Trophy points
1,298
Activity points
1,522
Hi,

Even i am looking for it, I want to dail GPRS phone using PIC or 8051 controller.

But I am sure its possible, can any body help me for connecting internet using Microcontroller with GSM/GPRS or CDMA phone
 

cozturk

Advanced Member level 4
Joined
Apr 2, 2002
Messages
105
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Activity points
904
Some win. aps. do this. for example siemensC35 apps. sends data via RS232 to phone dialing and sending sms also possible .
 

Fragrance

Advanced Member level 4
Joined
Jul 26, 2002
Messages
1,191
Helped
247
Reputation
494
Reaction score
198
Trophy points
1,343
Location
East Of Earth
Activity points
8,919
hi

Have look to attach file you will find what you need



Sorry I forget to give detail about this design based on PIC16F877 which attach to a temperature sensor, and also to siemens GSM mobile to send current position of the temperature to other location totally programmable source code and proteus DSN file can found in attachment
 

as_518

Member level 4
Joined
Apr 10, 2005
Messages
74
Helped
5
Reputation
10
Reaction score
1
Trophy points
1,288
Activity points
2,380
can you give details of how to use these files
 

gorkin

Advanced Member level 1
Joined
Feb 27, 2002
Messages
422
Helped
13
Reputation
26
Reaction score
5
Trophy points
1,298
Location
brazil
Activity points
3,384
Hello Fragance!
It´s possible Your send or upload a schematic in other format like *.pdf, *.jpeg or *.gift ?

I am don´t have/know PROTEUS...

Thanks a lot, Gorkin.
 

Fragrance

Advanced Member level 4
Joined
Jul 26, 2002
Messages
1,191
Helped
247
Reputation
494
Reaction score
198
Trophy points
1,343
Location
East Of Earth
Activity points
8,919
gorkin said:
Hello Fragance!
It´s possible Your send or upload a schematic in other format like *.pdf, *.jpeg or *.gift ?

I am don´t have/know PROTEUS...

Thanks a lot, Gorkin.
here is jpg format
 

seadolphine2000

Advanced Member level 3
Joined
Apr 12, 2005
Messages
881
Helped
122
Reputation
244
Reaction score
86
Trophy points
1,308
Activity points
7,374
A friend told me that his graduation project is about " TRAFFIC CONTROL ", they use a microcontroller to send an SMS to a mobile, that displays this SMS on a large panel in the street.

Any ideas concerning this project.???
 

Taro

Full Member level 2
Joined
Jun 28, 2001
Messages
143
Helped
8
Reputation
16
Reaction score
5
Trophy points
1,298
Activity points
1,195
Dear,
As I know you can do it, through AT Command
of mobilephone that you want to work with.
 

seadolphine2000

Advanced Member level 3
Joined
Apr 12, 2005
Messages
881
Helped
122
Reputation
244
Reaction score
86
Trophy points
1,308
Activity points
7,374
How could I make project like this.??
Where should I start.??

I really sppreciate all your help.
 

Shread

Newbie level 6
Joined
Jan 12, 2005
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
105
It's very useful thing, but it will work only with phones that have integrated modem or with GPRS modems. Most suitable mobil phone interface is RS-232(CMOS level, as well).
 

minos

Member level 1
Joined
Jul 11, 2002
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
192
i used a r300 tdma ericsson cellular phone, to send sms , i don't know if the phone you're using has the same connector, but the r300 has a serial interface in the connector at the bottom, only the protocol is standard the voltage levels are to 3v to 0 , the way to dial a number is sending thru hiperterminal or another comunicactions software the string Atdt XXXXXXXX where X is the number to dial
if you want to use other functions of the phone, nned to refer to the TIA docs
, i currently have the docs for tdma if you need msgme pls
 

alzomor

Advanced Member level 2
Joined
Jun 9, 2005
Messages
678
Helped
39
Reputation
78
Reaction score
8
Trophy points
1,298
Location
Cairo
Activity points
6,417
Hi

Attached you can find AT commands for sony Ericson Mobile phone
I think t's the Same for all phones as AT commands is Standard.
1-You need to use a micro controller with Serial port , or you had to implement serial port in SW
2-you need to use a mobile phone with modem /GSM modem
3-Send AT commands from your microcontroller to the mobile phone throgh serial port

thats All

Salam
Hossam Alzomor
 

wdavid

Newbie level 2
Joined
Mar 19, 2003
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
90
Is the attached AT commands set valid for all sony errisson mobile phone?



alzomor said:
Hi

Attached you can find AT commands for sony Ericson Mobile phone
I think t's the Same for all phones as AT commands is Standard.
1-You need to use a micro controller with Serial port , or you had to implement serial port in SW
2-you need to use a mobile phone with modem /GSM modem
3-Send AT commands from your microcontroller to the mobile phone throgh serial port

thats All

Salam
Hossam Alzomor
 

postertap

Newbie level 1
Joined
Jun 14, 2007
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,284
Hi,

any one have the information about using PIC for GPRS phone or modem?

thansk
 

noha eng

Newbie level 3
Joined
Nov 27, 2010
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,303
ma project the same idea but am using instead of mobile am using gsm module M1306B so am just nedd the code ( micro c) to burn it on the pic 16f877a
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top