IR Receiver for NEC protocal

[b.sabdheep]

Can any one help me to decode NEC remote and send the data in UART. I'm using 16f886.

I will be happy if any one can help me with the example code.

Thanks in advance

 

[ashad]

Might be useful
https://www.youtube.com/watch?v=o4HqdnmTNoQ

https://www.mikroe.com/forum/viewtopic.php?f=97&t=37755

 

[b.sabdheep]

Hey Ashad

Thanks for the link. But i couldn't make out with that. Could you help me with code example for Hi-Tech c or with CCS compiler

 

[ctownsend]

Can any one help me to decode NEC remote and send the data in UART. I'm using 16f886.

I will be happy if any one can help me with the example code.

Thanks in advance

Lots of information on the internet regarding the protocol. There are lots of variations of the NEC protocol. Get a logic analyzer and learn.

 

[milan.rajik]

Try these

https://extremeelectronics.co.in/code-libraries/using-ir-remote-with-avr-mcus/
https://extremeelectronics.co.in/code-libraries/using-ir-remote-with-avr-mcus-part-ii/

https://extremeelectronics.co.in/avr-projects/avr-project-remote-controlled-fan-regulator/

 

[sahu]

Try these
https://www.circuitvalley.com/2015/01/remote-ac-fan-dimmer-microcontroller-relay-control.html

 

[milan.rajik]

All IR decoder. C18 code. Just change the delay function and it will compile in Hi-Tech Compiler.

https://www.vecoven.com/elec/ir/ir.html