Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interpolation Error in HFSS. Anyone have a solution for it?

Status
Not open for further replies.
M

mankan

Junior Member level 1
Joined
Apr 6, 2010
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
California
Activity points
1,410
Hello

I am using HFSS for my PCB trace SI simulation. In my sweeps, the solver getting struck in one point at a particular interpolation error thinking that in that frequency convergence will occur. for example at freq 2.5 GHz where the interpolation error is 33%, the solver is thinking the convergence will occur at that frequency range making successive simulation in frequencies nearby to that.

Anyone faced this problem and have a solution please reply back.

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top