Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[AVR] internal ADC data problem

Status
Not open for further replies.

banner

Member level 1
Joined
Oct 6, 2009
Messages
35
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
iran
Activity points
1,529
Hi there,
I have problem reading ATMEGA16 ADC(setting: ADC interrupt with noise canceller/10bit). Actually this is not my first try with internal ADC,but this time with any reference, I receive data whith is not related to Analogue voltage.data is combination of 0x3F(satureated!!!) and 00. what could be the problem?
thanks,
 

Looks like initialization, reference voltage and reading data from ADC related issue.
Are you using AVR studio and any libraries ? if so check those functions used in initializing and reading of data. I am using ADC with AVR but did not experience such trouble.
Further information will help resolving the issue.



A Raoof Khan
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top