Interfacing SD Card to PIC16F Using Hi-Tech C Compiler

Status
Not open for further replies.
N

nishat anjum khan

Member level 2
Joined
Aug 4, 2012
Messages
44
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,562
thank u...finally i have got accurate result...can u tell me about the difference between sd and micro sd card? i used micro sd for my voice recognition circuit but it shows error
 

Re: motor control with atmega8

hi

sd card is directly connected to µc, but micro sd card is connect using adapter to interface with µc.
 

Re: motor control with atmega8

madhusuthanan said:
hi

sd card is directly connected to µc, but micro sd card is connect using adapter to interface with µc.
Click to expand...


Voltage 3,3V ? Both cards must have adequate leveling and for both you can use adapter or just simple signal leveling with zenerz and some resistors.


nishat anjum khan said:
thank u...finally i have got accurate result...can u tell me about the difference between sd and micro sd card? i used micro sd for my voice recognition circuit but it shows error
Click to expand...

Check pins for start.

 

Re: motor control with atmega8

i have written a code to initialize sd card for my project...here is my code and circuit


is it ok?
 

Attachments

  • voice.rar
    19.8 KB · Views: 90

Please don't mix several subjects in the same thread.
The sd card related discussion is not related to the motor control so I have moved this in a new thread.
 

i have written my code in hitech c for pic16f...but this isn't executed properly...some problem occured for read and write on sd card
 

He didn't , he started posting this in his previous thread that was motor control with mega8 and I have decided to move the posts to a new thread because the SD card discussion that started after the motor control was solved was a different subject but actually it was worse than I thought, it was or a different mcu too!
 

I have changed the title to reflect the true topic of discussion.

Please post your source code using CODE/SYNTAX tags or zip it into a single file and upload.

BigDog
 

this is my code and circuit...and sorry as i didn't change the title
 

Attachments

  • voice.rar
    19.8 KB · Views: 90

hi

do you check it in simulation? it works fine then check there s problem in hardware.
 

i tried...but in simulation i had to fave problems due to sd card...can u check it plz??
 

Attachments

  • simulation.rar
    16.3 KB · Views: 84

yes...but according to the code error led is on which indicates the problem of sd card to read or write...do u simulate it? is it working?
 

no, there is missing some files, audio & SD card. you remove sd card & then use as play back & test it
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…