interfacing 16 * 1 lcd display

[dexterpandian]

can any one help me how to interface 16 * 1 lcd display in 89c52

 

[d@nny]

YouTube - ‪HD44780 16 X 2 LCD with PIC16F819 (JHD162A)‬‏

---------- Post added at 12:41 ---------- Previous post was at 12:39 ----------

I know nothing much about microcontrollers even i dont know how to programme a microcontroller perfectly but i have made lcd with out the help of any person just with the help of the HD44780 Datasheet. You should try this data sheet as it is just simplest

 

[bigdogguru]

Here are a few LCD to 8051 variant interfacing/programming tutorials:


LCD interfacing with Microcontrollers tutorial



The majority of common LCD displays are based on the Hitachi HD44780 chip, so the interfacing is either 4-bit or 8-bit modes. Delays are critical when programming your particular MCU, the LCD will not function properly without them.

These examples should get you started in the right direction.

 

[ckshivaram]

does you 16*1 have auxillary controller in it????

---------- Post added at 12:15 ---------- Previous post was at 12:12 ----------

because The Working of 16 x 1 LCD is Little Bit Different then of LCD 16 x 2.

In Most of Cases 16 x 1 LCD is available without Auxiliary Controller. Means as you see only HD44780 Controller at Back Side.