Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[PIC] Interface Sony Ericsson K750i with PIC Microcontroller [HELP]

Status
Not open for further replies.
Z

zentos

Member level 1
Joined
Apr 7, 2014
Messages
33
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
278
Hi there,

I'm a newbie and tried to dial a no from MCU (16F887) to Sony Erricsson K750i. With hyper terminal connected with data cable to pc it works AT commands fine.But I couldn't communicate SE750i with MCU. I have attached schematic I used (drawn by me) and the flowcode program that I used. Please help me to get this done, really appreciate.


Supported links
https://pinouts.ru/CellularPhonesCables/sony_ericsson_service_cable_pinout.shtml
 

Attachments

  • Pic to mobile.jpg
    1.2 MB · Views: 83
  • PIC to Mobile.rar
    452.1 KB · Views: 58
Last edited:

Finally Got it work with Proteus simulator. But with the same hardware setup it doesn't dial number.

Screenshot.jpg
Pic to mobile.jpg
 

Attachments

  • PIC_TO_MOBILE.zip
    23.1 KB · Views: 55

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top