Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interface between mpc82xx and Texas DSP 6416 HPI

Status
Not open for further replies.
T

tlp71@hotmail.com

Full Member level 4
Joined
May 14, 2002
Messages
220
Helped
6
Reputation
12
Reaction score
2
Trophy points
1,298
Activity points
1,596
mpc82xx to TMS641x

hi to all.
nobody have a interface between a mpc82xx to Texas DSP 6416 HPI?
Thanks
G.
 

Re: mpc82xx to TMS641x

See TI Aplication Notes. Author Mr. Zoran.Interface between 860 and HPI
I did interface only between mpc8260 and expansion bus of 6203. I used local bus of PowerQuicc II for this object
 

Re: mpc82xx to TMS641x

hi zoran.
Do you use a pld to interface the two devices?
If yes you route alla control signals in to pld or you use a mix mode?
 

Re: mpc82xx to TMS641x

As I said, I worked with C6203 with Expansion bus. Yes some control signal like XCS routed through PLD. 32 bit Local bus interfaces to Expansion bus through buffer.
Roman

P.S. Try to find AN on this topic on TI web.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top