Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Interested in CPLD and FPGA

Status
Not open for further replies.

mr_W

Junior Member level 2
Joined
Dec 15, 2006
Messages
23
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,525
Hi all,

I'm interested in working with CPLD, but have trouble tracking down what software and hardware tools I need to start with ?

I'd like to start from beginning, to design simple logic circuit, programm it into CPLD, and then test it in real hardware.

What can you recommend ?

Thanks.
 

yasser_shoukry

Full Member level 4
Joined
May 31, 2006
Messages
233
Helped
25
Reputation
54
Reaction score
5
Trophy points
1,298
Location
Cairo - Egypt
Activity points
2,749
I recommend you the following:
Hardware: Xilinx Spartan3E starter Kit, it contains both CPLD and FPGA with many other peripherals.

Software: Xilinx ISE (free from www.xilinx.com) + ModelSim XE (also free from www.xilinx.com)
 

    mr_W

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top