Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Integrating GPS with PSOC5 and display data on LCD display

Status
Not open for further replies.
G

GURUPRASAD KN

Newbie level 1
Newbie level 1
Joined
Feb 5, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,286
HI everyone,

I'm using ublox GPS receiver with 3.3V supply. I'm integrating with PSOC5 controller and want to display the data on LCD display. Can anybody help me with example code..
 

GURUPRASAD KN said:
HI everyone,

I'm using ublox GPS receiver with 3.3V supply. I'm integrating with PSOC5 controller and want to display the data on LCD display. Can anybody help me with example code..
Click to expand...

hi,friend you can communicate the GPS module with mcu using UART and then store the received data in register or memory location,after received you can display the data in lcd.So,just implement the rs232 code to communicate with gps.
so,1st attempt to communicate.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top