Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Integrating blocks in Power management Layout

Status
Not open for further replies.

msm_aravind

Newbie level 1
Joined
Aug 14, 2004
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
7
power manage layout

Hi,

Can anyone comment on the minimum spacing requirement between Bandgap reference module layout and DCDC regulators(w.r.t.switching node)module layout in 65um technology to minimize the transmission of noise generated by DCDC ?PowerFETS inside DCDC are well surrounded by double guard rings.It is inside a power management IP used in a SoC .

thanks,
aravind
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top