Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Installing cadence libraries

Status
Not open for further replies.

Old Nick

Advanced Member level 1
Joined
Sep 14, 2007
Messages
480
Helped
68
Reputation
136
Reaction score
18
Trophy points
1,298
Activity points
4,243
Hi, I'm wondering if anyone can give me pointers on installing library files in Virtuoso 6.1.5.
I've already installed the main technology prim lib with the mosfets, caps etc. But I'm trying to install I/O and logic libraries but can't figure out how to do it. The instructions I've been directed to don't tally up with the library files I have.
It is the towerjazz ts18is process.
For instance the std_cell library unzipps to two folders FS120_STD_Cells_(0.18um)_2005.12/DW_TOWER_tsl18fs120_2005.12_patch and DW_TOWER_tsl18fs120 in this folder is a subfolder 2005.12 which contains folders apollo, astro, cdl, do, edif, gds, spice, synopsis, verilog and vhdl.
I have no idea what to do with this to get these libraries into library manager.
If anyone can givce me step by step instructions that would be great.
Cheers.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top