Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

input signal and cmfb

Status
Not open for further replies.
S

shanmei

Advanced Member level 1
Joined
Jul 26, 2006
Messages
430
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Location
USA
Activity points
4,496
when the input signal frequency increase, it seems that the cmfb can not control the output DC voltage , how to slove the problem? thank you
 

the pdf is not clear.
maybe you can check the driver ability of the output stage
and notice the feedback path is negative.
 

    S

    shanmei

    Points: 2
    Helpful Answer Positive Rating
from the pm you sent i feel that the cmfb which is dominated by the current is not enough as you are using very high resistors and the capacitance makes it all the more difficult...... so use lower value of resistors and if possible try reducing the capacitances involved....
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top