Input regulated circuit for soundcard needed pls

Status
Not open for further replies.

prinsloo

Member level 5
Joined
Sep 19, 2004
Messages
93
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Location
Bethlehem RSA
Activity points
697
I need <1volt output from 1V-15volt max input for my sound card.I tried to control the output via a pot,no success.(The input wave need to stay the same,it's for a pc-scope)
Could you please post a schamatic.

Thanks in advance

1-15volt AC Input (max)---[variable resistor or ]-----output of 0-1volt AC (max) [circuit wanted for this part]

NB:Input wave must stay the same!
 

Sorry to ask...
What's the relation between '<1volt output', '1V-15volt max input', and 'sound card'? Don't really get your meaning. Pls elaborate more, better if you could provide a schematic diagram.

Do you mean the input varies from 1-15V? Do you mean the output must be within 0-1V? For example, if the input is 15V, the output is 1V. If the input is 1V, the output is 1/15 volt.

Where is the '1V-15V' from? May be the '1V-15V' source impedance is too big. Probably you need an op-amp (high input impedance) to help.
 

    prinsloo

    Points: 2
    Helpful Answer Positive Rating
The simplest solution is a voltage divider.
(Ex. 150k/10k would give a 15:1 ratio).
Depends on how sensitive you want to
be to low-level signals.
<als>
 

I beleive what you are looking for is a audio compressor / limiter circuit.
Audi compressor's / limiters are often used for microphones etc. to output a constant ac voltage level from a variable input level.
Try to google for "audio compressor" or "compressor amplifier" or "microphone compressor" or "audio limiter" or similar.
Try to look at these devices for example:
SSM2165 - Complete Microphone Conditioner in an 8-Lead Package with Variable Compression & Noise Gating
http://www.analog.com/en/prod/0,2877,SSM2165,00.html

SSM2166 - Complete Microphone Conditioner in a 14-Lead Package with Variable Compression & Noise Gating
http://www.analog.com/en/prod/0,2877,SSM2166,00.html

SSM2167 - Low Voltage Microphone Preamplifier with Variable Compression & Noise Gating:
http://www.analog.com/en/prod/0,2877,SSM2167,00.html
**broken link removed**


You can also find some application and design notes about compressors / limiters here: http://www.thatcorp.com
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…