Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

information about SPDIF ?

Status
Not open for further replies.

Ayman Muhamad Ahmed

Newbie level 3
Joined
Jul 4, 2014
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
31
Hi all,

Could anyone help me finding the spdif (sony-philips digital interface format) standard or Specs ? other than the OpenCores

Thanks in advance.
 

Hi,

wikipedia has a lot of information and links to related documents. What else do you need?

maybe look for "s-pdif" or "s/pdif".

Additional information you will find in s/pdif transmitters or receivers datasheets and at the manufacturers homepage.

Klaus
 
HI,

i need the specs or the standard as i'm designing the SPDIF, So i need to know first what's SPDIF

Thanks,
Ayman
 

I have seen that and also i have searched Wikipedia and another websites but also i have a problem in designing a block diagram for the SPDIF Rx. i need to spec this Rx as we are working in an HDMI 2.0 project so we need that interface.
i found:
**broken link removed**
http://www.audiocraftersguild.com/AandE/npt.on.jitter2.htm
http://www.tnt-audio.com/clinica/diginterf1_e.html
**broken link removed**
http://www.tech-faq.com/spdif.html
http://en.wikipedia.org/wiki/S-PDIF

But i still can't draw the block diagram for this interface. Could anyone help me in spec-ing or drawing the block diagram ?

Thanks,
Ayman
 

Hi,

i googled for "S/pdif whitepaper"

a lot of hits. Try to see the results.

maybe the folowing is what you need:
"Developing a SPDIF Input Module in LabVIEW FPGA..."


Klaus
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top