Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Information about SMPTE timecode protocol and physics

Status
Not open for further replies.

cube007

Full Member level 6
Joined
Mar 12, 2002
Messages
386
Helped
16
Reputation
32
Reaction score
5
Trophy points
1,298
Location
Australia
Activity points
3,477
Hello,

I'm looking for information about the SMPTE timecode.
I found a lot of stuff in google, but the most was about the protocol and not the physics.

Here are my interests:

SMPTE timecode protocol(s) -> detailed description
SMPTE timecode physics -> which hardware do I need for in/output.


Thank you in advance,
cube007


PS: English stuff would be very good but German would be better.
 

CADDevil

Member level 5
Joined
Jun 26, 2001
Messages
80
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
649
Look at **broken link removed**

I used this chip in the past. It can do almost anything with SMPTE timecodes VITC/LTC/MIDI etc.
Pretty simple to interface it to let's say AVR90S8515 or similar microcontroller.
 

cube007

Full Member level 6
Joined
Mar 12, 2002
Messages
386
Helped
16
Reputation
32
Reaction score
5
Trophy points
1,298
Location
Australia
Activity points
3,477
Hi CADDevil,

thank you very much for this good link. It seems that it's realy easy to interface it.

By,
cube007


PS: I donated you 10 points for the very good information.
 

hcet

Full Member level 5
Joined
Mar 9, 2002
Messages
313
Helped
21
Reputation
28
Reaction score
6
Trophy points
1,298
Activity points
2,094
i guess this is what you need!
 

cube007

Full Member level 6
Joined
Mar 12, 2002
Messages
386
Helped
16
Reputation
32
Reaction score
5
Trophy points
1,298
Location
Australia
Activity points
3,477
Hi ep20k,

thank you for the detailed description.

By,
cube007
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top