Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Info about the control/status register of INTEL PXA27x SRAM

Status
Not open for further replies.
W

wurzelsepp

Junior Member level 3
Joined
Mar 27, 2002
Messages
28
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
121
INTEL PXA27x

Could somebody tell me where information on the control/status registers of the PXA270 Internal SRAM might be found?

On one hand, the PXA27x Developer's Manual states "the Internal SRAM consists of 4 blocks, control/status registers ...".
On the other hand, again the PXA27x Developer's Manual states "There are no associated registers for the Internal SRAM..."

AND ....

The Intel's Board Bring Up software for Mainstone II writes zero into a register at phys. address 0x58000000, that might not exist - if the Developer's Manual is true :-((

Could you help me, please?
Thank you in advance

Regards:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top