Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Inductance of Ferrite core Inductor

Status
Not open for further replies.

Ow@i$

Advanced Member level 1
Joined
Sep 18, 2012
Messages
413
Helped
78
Reputation
156
Reaction score
75
Trophy points
1,308
Location
Pakistan
Activity points
3,430
I have made an inductor using FT37-43 core.. now can I use simple LCR meter and connect it on two ends of wire and calculate Inductance???
 

You calculate the expectable inductance based on known core AL value and number of windings. Or measure it with your LCR meter, presumed it's workiing for the inductance range. Finally you can compare calculated and measured value. Depending on the quality of the LCR meter, you'll decide to believe one or the other...
 
  • Like
Reactions: Ow@i$

    Ow@i$

    Points: 2
    Helpful Answer Positive Rating
thanx alot.. i want to know one more thing... what if we know nothing about the core (just out of a junk box) now how can we determine what core it is whether FT37-43 or something else.... assume i don't have an inductance meter to....
 

Measuring resonance frequency of a LC resonant circuit is most promising, using a known capacitor.
 
  • Like
Reactions: Ow@i$

    Ow@i$

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top