Nov 25, 2008 #1 M mannnish Full Member level 3 Joined Aug 6, 2006 Messages 154 Helped 5 Reputation 10 Reaction score 2 Trophy points 1,298 Activity points 2,235 diyirrepeater problems hi, i am looking techniques to increase range of infra red control system. If you guys have some ideas, please share with me thanks in advance mannnish
diyirrepeater problems hi, i am looking techniques to increase range of infra red control system. If you guys have some ideas, please share with me thanks in advance mannnish
Nov 26, 2008 #2 VVV Advanced Member level 5 Joined Nov 26, 2004 Messages 1,575 Helped 384 Reputation 768 Reaction score 88 Trophy points 1,328 Activity points 19,971 diyirrepeater.blogspot.com You can use more LEDs in parallel and increase the peak current through them. At the same time, since you increased the current, you may want to reduce the carrier duty-cycle in order to save some power.
diyirrepeater.blogspot.com You can use more LEDs in parallel and increase the peak current through them. At the same time, since you increased the current, you may want to reduce the carrier duty-cycle in order to save some power.
Nov 27, 2008 #3 Audioguru Advanced Member level 7 Joined Jan 19, 2008 Messages 9,457 Helped 2,151 Reputation 4,302 Reaction score 2,008 Trophy points 1,393 Location Toronto area of Canada Activity points 59,721 Focus the transmitting beam and focus the receiver. Make the receiver have more gain to be more sensitive.
Focus the transmitting beam and focus the receiver. Make the receiver have more gain to be more sensitive.
Nov 27, 2008 #4 C CMOS Advanced Member level 3 Joined Jan 6, 2004 Messages 862 Helped 94 Reputation 186 Reaction score 50 Trophy points 1,308 Location USA Activity points 5,673 Use IR repeaters like this https://diyirrepeater.blogspot.com/
Nov 27, 2008 #5 flatulent Advanced Member level 6 Joined Jul 19, 2002 Messages 4,624 Helped 489 Reputation 980 Reaction score 151 Trophy points 1,343 Location Middle Earth Activity points 46,689 You can also lower the bit rate.
Nov 27, 2008 #6 Awarapunshee Advanced Member level 1 Joined Jul 11, 2007 Messages 409 Helped 93 Reputation 186 Reaction score 31 Trophy points 1,308 Location Some Where In Heaven Activity points 3,184 Use the appropriate lens on both end along with the suggestion given above. Enjoy!
Dec 7, 2008 #7 N nikhilele Advanced Member level 3 Joined Jan 11, 2006 Messages 805 Helped 101 Reputation 202 Reaction score 76 Trophy points 1,308 Location Bangalore India Activity points 6,376 use IR laser but pointing is required.. in this kind of setup.. user better receiver/sensor