Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Impulse Response / Frequency response

Status
Not open for further replies.

Autra

Newbie level 1
Joined
Nov 17, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
I have a major question . Please take a look.

i have this de :

2cht56p.png


And i have to find IR and FR

We can "translate" the given de into:

Y(Ω)*(jΩ)^2 + Y(Ω)*5*(jΩ) + 4*Y(Ω)= jΩ*X(Ω)+2*X(Ω)

So i am reaching a point where H(Ω) = Y(Ω)/X(Ω) =

= (jΩ +2)/[(jΩ)^2 +5jΩ + 4] .

The my main problem is that i dont know how to continue from this point, because in the numerator is that jΩ, otherwise i have my standard methodology to solve it.

So what am i supposed to do for this point ?

Thanks
 

Aplying Laplace transform and solving for Y(s)/X(s) gives you the transfer function that is the same as the impulse response. Evaluating the transfer function for s=jw and taking magnitude and phase gives you the frequency response.
Commenting on your eq:
j^2 =-1
so
(jΩ +2)/[(jΩ)^2 +5jΩ + 4] = (jΩ +2)/[5jΩ + 4-Ω^2]
to get rid of a J you can normalize. That is multiply numerator and denominator by the conjugate.
Usually this is done to eliminate J in the denominator but you can do it in the numerator multipliying by
(jΩ -2)/(jΩ -2)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top