Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Impedance Measurement: CPW and CPS in HFSS

Status
Not open for further replies.
B

Buqpa

Member level 2
Joined
Oct 31, 2004
Messages
50
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
453
Hello everybody!

I have disigned a CPW-to-CPS transformer but I would like to know the impedance along the line, as the line has a impedance tranformer. Dimession are to be 50 to 120 ohm resistance (real impedance) but I don't know how to measure them using HFSS.
Is there some function in the program that allows to measure the impedance in a point?

That transformer will excitate an spiral antena I would like o know the simulated impedance at the input of the antenna

Thanks Everybody!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top