Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
you need to plot the input impedance of the antenna which is, in the case of single port network, Z11. The real part should be around 50 and the imaginary part should be crossing zero at that point. An alternative way is to plot S11 and the antenna is considered to be matched when S11<=-10dB.