Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Impact ionization in hemt

Status
Not open for further replies.
W

wmj2011

Newbie level 4
Joined
Jan 24, 2012
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,326
Hi,
I tried to apply impact ionization in simulation of hemt design.
I applied the following command, but seems nothing different. is that true, or my simulation is wrong?
How to actually define the impact to be very close to the channel of the hemt?

1. impact selb
2. impact selb an1=2e26 bn1=3.42e7 ap1=2e26 bp1=1.95e7 an2=2.6e8 bn2=3.415e7 ap2=4.98e6 bp2=1.95e7 egran=3.e6 betan=1.0 betap=1.0

Can somebody help?
Many thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top