Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Iinterfacingof CT to a microcontroller for a digital relay

Status
Not open for further replies.
R

rajeshmji

Newbie level 1
Newbie level 1
Joined
Feb 13, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,287
Hai...i am doing a project which is based on embedded system.its a digital motor protection relay for three phase induction motors.The microcontroller which i am using is renasas R8C/2C microcontroller.The relay has two phase CT's and one CBCT to measure the line current of the three phases and the secondary of CT is inputed to microcontroller ADC...............I Need the design from hardware side and how to do the calculation...kindly help me to do these so that it will be helpful to my project
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top