Hello Moof,
I try to use Zaphod Bootloader with MPLAB7.10 and PIC16F877A and found the same problem!!!
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to target
Target Device PIC16F877A found, revision = b0
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 Ready
Programming Target...
...Validating configuration fields
...Erasing Part
...Programming Program Memory (0x0 - 0x1E0F)
Verifying...
...Program Memory
ICD0060: Failed to bulk read target memory (Program) (Address:0x0) (Size:0x1000)
ICD0275: Programming failed.
MPLAB ICD 2 Ready
If possible, try test that situation for me please?
a) Burn PIC16F877A with Zaphod bootloader and put him in the ICD2 Clone board.
b) Uses another PIC16F877A for target.
c) Using MPLAB7.10 (new), load the Zaphod bootloader to do the program memmory to test in the target.
d) Tests the programming with ICD2.
In my case I always obtain the following mistake:
== == == == == == == == == == == == == ICD0060: Failed to bulk read target memory (Program) (Address:0x0) (Size:0x1000)
ICD0275: Programming failed.
== == == == == == == == == == == == ==
Tks!!!