Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

IBIS & Design flow

Status
Not open for further replies.

mostafa_elwakeel

Member level 1
Joined
May 30, 2004
Messages
33
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Location
egypt
Activity points
228
Dear All ,

i am new to high speed digital design . i start reading alot of books but i didnt find

any books or article that describe the all process of high speed design like when we

use ibis model and how i make pcb constraines , how i get stackup data from

manufacturer to use it in design.

all this step can any one help me plz

Thanks
 

aey

Member level 3
Joined
Nov 12, 2009
Messages
63
Helped
5
Reputation
14
Reaction score
1
Trophy points
1,288
Activity points
1,576
1. define ibis model for component example. TTL, Connector, Resistor. no need all. define net connected only.
2. define power normally 5v.
3. define clock example 100mhz with duty normally 50%
4. For stack u are define not maufac...
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top