Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

I2c: Start stop condition

Status
Not open for further replies.
A

abhinavpr

Junior Member level 2
Junior Member level 2
Joined
Jun 19, 2013
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
205
Hi all,

I2c spec says that STOP condition is generated by master after acknowledge from slave(and other conditions). but i could not find out
what would happen and how should a slave behave if it detects a STOP condition in middle of a data transfer (i.e lets say it receive a STOP condition while receiving address bits or data bits)

-abhinav
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top