cmy1st
Newbie level 3
hi!!
I want use pccvs in analogLib in virtuoso cadence
but I don't know how to use it, pccvs.
I read manual... but, In manual
probes=[...] Devices through which the controlling currents flow.
mprobes=[...] The mprobes function the same as probes except that
they will devide the input currents by the mfactor.
ports=[...] Indice of the probe ports through which the
controlling currents flow.
JustI fill prove as V1 or R1 etc and port as PULSE, 1or2
But when i simulate it. there is error
" ERROR (CMI-2239): I0.H0: Current is not available from type of component `I0.V1' used as probe."
And I attach circuit
H0, H1 is pccvs and it sensing V1, V0 each other
Thanks!!
I want use pccvs in analogLib in virtuoso cadence
but I don't know how to use it, pccvs.
I read manual... but, In manual
probes=[...] Devices through which the controlling currents flow.
mprobes=[...] The mprobes function the same as probes except that
they will devide the input currents by the mfactor.
ports=[...] Indice of the probe ports through which the
controlling currents flow.
JustI fill prove as V1 or R1 etc and port as PULSE, 1or2
But when i simulate it. there is error
" ERROR (CMI-2239): I0.H0: Current is not available from type of component `I0.V1' used as probe."
And I attach circuit
H0, H1 is pccvs and it sensing V1, V0 each other
Thanks!!