Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

I simulated paper in hfss but the results incorrect

Status
Not open for further replies.
Hi,

so first of all, take care of the RadiationBox dimensions...from the HFSS guide we know that this should be at least at lambda/4 from the radiating surfaces..check you design to assure that.


What is the frequency range ?

best
 
Try feeding with lumped port and reduce its size. Make it equal to the feed (in width ) and length = substrate thickness, I guess it is touching the gnd.

Your file: CPW has got no analysis setup.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top