chikaofili
Junior Member level 3
Hello
I used the VCD file from my Testbench.
My Testbench has 2 Ram instantiations and my top module instantiation. The two rams act as an external memory.
I used the VCD file for my power analyzer tool
My result makes no sense to me
Power dissipated for I/O thermal: 2574mW
I am only using 139 pins.
When I dont use a VCD file, and I set the toggle rates to be 50% for all pins ( I assumed 50% is the highest)
Power dissipated for I/O thermal: ~100mW
I attached the Results as well.
I am not sure what I am doing wrong.
I used the VCD file from my Testbench.
My Testbench has 2 Ram instantiations and my top module instantiation. The two rams act as an external memory.
I used the VCD file for my power analyzer tool
My result makes no sense to me
Power dissipated for I/O thermal: 2574mW
I am only using 139 pins.
When I dont use a VCD file, and I set the toggle rates to be 50% for all pins ( I assumed 50% is the highest)
Power dissipated for I/O thermal: ~100mW
I attached the Results as well.
I am not sure what I am doing wrong.