sameerccs11
Member level 3
hello
i m sameer,
actually i m working on a paper in which the ground plane is used but i dont know how to set the dimension for ground plane.somebody helped me in this but i think i m using pirated ie3d thats why i m not getting option to set the ground plane.
so i need the your favour
can anybody enter my parameters and can send me the ".geo" file. i m not asking to simulate it i just want to see how it luk after getting the ground plane.
these are my parameters
all dimensions in mm
Er=2.22
tangent loss=0.0009
h=6.985
GROUND PLANE DIMENSION = 61.2 x 61.2
W=49.27
L=32.85
radiius of probe = 0.635
probe feed
x= 10.95
y=16.42
if u can send me the structure for these parameters, i will be very thankful to you
regards
sameer
i m sameer,
actually i m working on a paper in which the ground plane is used but i dont know how to set the dimension for ground plane.somebody helped me in this but i think i m using pirated ie3d thats why i m not getting option to set the ground plane.
so i need the your favour
can anybody enter my parameters and can send me the ".geo" file. i m not asking to simulate it i just want to see how it luk after getting the ground plane.
these are my parameters
all dimensions in mm
Er=2.22
tangent loss=0.0009
h=6.985
GROUND PLANE DIMENSION = 61.2 x 61.2
W=49.27
L=32.85
radiius of probe = 0.635
probe feed
x= 10.95
y=16.42
if u can send me the structure for these parameters, i will be very thankful to you
regards
sameer