Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

I need 10 pwm using Atmega8 Microcontroller

Status
Not open for further replies.

eduard.el

Newbie level 1
Joined
Mar 26, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Armenia
Activity points
1,288
Hi.

I have remote control project using Atmega8 micro controller.
On receiver side I shuld control 10 lamps independently via triac.
For that purpose I need 10 independent dynamic PWMs using single Atmega8.
I have one interrupt coming from AC voltage, it is needed for synchronization purposes. The second one is coming from receiver side (when the packet is received).

So is it possible to drive this 10 pwms related to received packet data.

Thank you a lot ! ! !
 

ccccrnr

Junior Member level 3
Joined
Dec 7, 2009
Messages
29
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,281
Location
Tennessee USA
Activity points
1,468
i don't know why you want to use pwm, seems like digital output would work,

atmega8 dip i use only have 7 or 8 pwm pins, 4sideds may have more, so you may be short on pwms
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search


Welcome to EDABoard.com

Sponsor

Sponsor

Design Fast


×
Top