Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] I am unable to connect rn171 wifi module to an adhoc network

Status
Not open for further replies.

manj

Newbie level 5
Newbie level 5
Joined
Dec 7, 2012
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,337
Hello all,
I am using rn171 wifi module. I configured it to adhoc mode but I am unable to detect the same adhoc network on my laptop(windows 7).
Also I created ad hoc network on my laptop and scan for the same on module side,it detects the network and I am getting scan result as
SCAN:Found 1
01,10,-43,00,2200,00,00,9e:f4:29:67:00:70,my_adhoc_network
END:
and if I enter command join
I am getting reply as
Auto-Assoc my_adhoc_network chan=10 mode=OPEN SCAN OK
Joining my_adhoc_network now..
<4.00> Disconn from my_adhoc_network,AUTH-ERR
Please help me to know what will be the problem to join adhoc network with my laptop.I have done all settings as per user manual.

Thanks.
 

solved this 1 by connecting it to android mobile in hot spot.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top