Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HyperLynx 8.1.1 (Xilinx S6_GTP_SIS_KIT_1_1_ELDO Modelling Problem)

Status
Not open for further replies.
Black Jack

Black Jack

Full Member level 4
Joined
Dec 2, 2003
Messages
236
Helped
14
Reputation
28
Reaction score
3
Trophy points
1,298
Location
UKRAINE
Activity points
1,817
Hello!

I try to model GTP_RefClk.ffs project from s6_gtp_sis_kit_1_1_eldo under HyperLynx 8.1.

When I start modelling with digital oscilloscope I have a error message.
See attachment, please.
I think that problem with

s6_gtp_sis_kit_1_1_eldo\HL_projects\S6_kit.ini or
s6_gtp_sis_kit_1_1_eldo\HL_projects\modelsim.ini

S6_kit.ini points to

$HYP_HOME/Ams/pkgs/icx_pro_sim/2008.2/modeltech/v6.4a/modelsim.ini

This modelsim.ini points to

STD = $AMS_MODEL_TECH/std



But I can`t find $AMS_MODEL_TECH record in enviroments variables.

Now I cannot understand that has caused this problem (SIS Kit INI files or HyperLynx\Environment settings)?

Could you to give me advice on this problem, please?



-- Regards!
 

Attachments

  • Snap_2011.04.01_14h43m02s_001.bmp
    242.6 KB · Views: 102

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top