Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] HSPICE - Power up (start up) simulation

Status
Not open for further replies.

gabrielg

Newbie level 5
Joined
Nov 19, 2010
Messages
10
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,341
Hi all!
In other simulation programs there is an option that indicates the simulator to ramp all the sources from 0 to their netlist specified values.
For example, in T-spice:
.tran/Powerup 100ps 400ns
.option powerlen=10p (indicates the time souces take to reach the final value)
Does anyone know if there is such an option in HSPICE?
Thanks in advance!
G.
 

erikl

Super Moderator
Staff member
Joined
Sep 9, 2008
Messages
8,112
Helped
2,687
Reputation
5,354
Reaction score
2,288
Trophy points
1,393
Location
Germany
Activity points
44,153
is such an option in HSPICE?
No, not to my knowledge. I've always used a PWL type source for this purpose, or simply used an appropriate rise time for a pulse source.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top