NiC
Junior Member level 2
- Joined
- May 26, 2004
- Messages
- 21
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Thessaloniki, Greece
- Activity points
- 138
.ends card missing at reading hspice
Hello i use HSPICE and want to use the opamp: LT6004. I have donwloaded the spice model from manufactures site (https://www.linear.com/pc/productDetail.jsp?navId=H0,C1,C1154,C1009,C1021,P29313) but i got the errors:
**error** (c:\synopsys\hspice_z-2007.03\simulations2\new\d.testing\06opamptest2.sp:95) expected a name, got a number tokin number= 7
**error** (c:\synopsys\hspice_z-2007.03\simulations2\new\d.testing\06opamptest2.sp:96) .ends card missing at readin
**error** (c:\synopsys\hspice_z-2007.03\simulations2\new\d.testing\06opamptest2.sp:96) difficulty in reading input
I have used the line: XLT6004a 66 68 52 56 53 LT6004
to enter the opamp in my simulation code. Can any body help me?
I have found sth about semicolon for two last error lines but there is no semicolon in the subcircuits code.
Hello i use HSPICE and want to use the opamp: LT6004. I have donwloaded the spice model from manufactures site (https://www.linear.com/pc/productDetail.jsp?navId=H0,C1,C1154,C1009,C1021,P29313) but i got the errors:
**error** (c:\synopsys\hspice_z-2007.03\simulations2\new\d.testing\06opamptest2.sp:95) expected a name, got a number tokin number= 7
**error** (c:\synopsys\hspice_z-2007.03\simulations2\new\d.testing\06opamptest2.sp:96) .ends card missing at readin
**error** (c:\synopsys\hspice_z-2007.03\simulations2\new\d.testing\06opamptest2.sp:96) difficulty in reading input
I have used the line: XLT6004a 66 68 52 56 53 LT6004
to enter the opamp in my simulation code. Can any body help me?
I have found sth about semicolon for two last error lines but there is no semicolon in the subcircuits code.