How to write a simple "Hello World" code with CCS compiler

[debutpic]

Hi all
Until today,i programmed with PBP (melabs),but now i want to learn the C language,my choice is CCS compiler.
For my first progam i want to use a LCD for to show "HELLO WORLD",but no instruction is equal at (lcdout melabs),how to make?
Can you send me a little program
I use a board and the next connections
RB7->DB7
RB6->DB6
RB5->DB5
RB4->DB4
RB3->RS
RB2->E

thank's in advance

 

[H_u_n_t_e_r]

lcd.c ccs

printf(LCD_PUTC, "hello world");
thats it.
also please check c:\program files\picc\examples directory
(ex_admm.c , ex_lcdkb.c)
there are lcd applications. in these files.

according to lcd.c(this file is driver for lcd) c:\program files\picc\drivers

// As defined in the following structure the pin connection is as follows:
// D0 enable
// D1 rs
// D2 rw
// D4 D4
// D5 D5
// D6 D6
// D7 D7
//
// LCD pins D0-D3 are not used and PIC D3 is not used.

U can use PortB or PortD as lcd port by define in lcd.c file
Regards.

 

[debutpic]

ccs lcd c

thank's for your reply
please can you send me the file lcd.c modified for to compare him with the original file

another question
i can't use a LCD without the driver lcd.c,because to show this little"HELLO WORLD" must take much flash memory no?

 

[ME]

ccs lcd

I have uploaded a modified LCD.C for CCS in this topic:
Maybe you can learn from it and modify it for your own purpose.

 

[Analyzer]

ccs lcd.h

Hi,

You should include necessary header files to code.For example is you use lcd, you should include instant lcd header like #include <lcd.h> If you bother optimized code, i heard hi-tech produces more optimized and short code vs ccs.I didn't try it but heard. Good luck

Analyzer.

 

[Analyzer]

lcd.c for pic16f84a in ccs

Oh, I forgot.

Maybe this link will be helpful to you. www.pic-c.com/forum/general