Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to use spice file in MWO for oscillator

Status
Not open for further replies.

dkmin96

Newbie level 4
Joined
Mar 31, 2005
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,357
how to use pspice

Hi.

I am trying to simulate osc. in MWO. I think i should use spice file of BJT from

philips BFR93A. Unfortunately i failed to find the way to put data file.

Could you tell me how to import and use spice file, not s2p?

Only some error was found when i tried to use subblock of spice file, 'No port

found'.

I have to change something from spice file? VI curve also is not possible.

Somebody helps me to do something.
 

how to use pspice to simulate

In MWO, click [Project] ---> [Add Netlist] ---> [Import Netlist] ---> File Type: Spice Netlist.

Hope can help u
 

bfr91a oscillator

I think you may may the spice file as a sub circuit nder simulation. Just so.
 

bfr93a schematic

Mac7978 said:
In MWO, click [Project] ---> [Add Netlist] ---> [Import Netlist] ---> File Type: Spice Netlist.

Hope can help u

I do not get good result. In general, How do you simulate oscillator or

mixer part especially phase noise and VI curve whenever you do.

What kind of data file do you import?

Below is the one i'm trying to simulate. I just found in philips.

my purpose is to simulate phase noise and oscillation frequency.

Please do not ignore and give me favor.

Thank you.

Basically I tried to import subblock in schematic. It failed. I just v seen

some warning message that i would change the node of transistor.

but it's beyond my head.

------------------------------------------------------------------------------------
* Filename: BFR93A_SPICE.PRM
* BFR93A SPICE MODEL
* PHILIPS SEMICONDUCTORS
* Date : September 1995
*
* PACKAGE : SOT23 DIE MODEL : BFR91A
* 1: COLLECTOR; 2: BASE; 3: EMITTER;
.SUBCKT BFR93A 1 2 3
Q1 6 5 7 7 BFR91A
* SOT23 parasitic model
Lb 4 5 .4n
Le 7 8 .83n
L1 2 4 .35n
L2 1 6 .17n
L3 3 8 .35n
Ccb 4 6 71f
Cbe 4 8 2f
Cce 6 8 71f
*
* PHILIPS SEMICONDUCTORS Version: 1.0
* Filename: BFR91A.PRM Date: Feb 1992
*
.MODEL BFR91A NPN
+ IS = 1.32873E-015
+ BF = 1.02000E+002
+ NF = 1.00025E+000
+ VAF = 5.19033E+001
+ IKF = 8.15511E+000
+ ISE = 1.39029E-014
+ NE = 1.51292E+000
+ BR = 1.76953E+001
+ NR = 9.94038E-001
+ VAR = 3.28032E+000
+ IKR = 1.00000E+001
+ ISC = 1.04297E-015
+ NC = 1.18993E+000
+ RB = 1.00000E+001
+ IRB = 1.00000E-006
+ RBM = 1.00000E+001
+ RE = 7.63636E-001
+ RC = 9.00000E+000
+ EG = 1.11000E+000
+ XTI = 3.00000E+000
+ CJE = 2.03216E-012
+ VJE = 6.00000E-001
+ MJE = 2.90076E-001
+ TF = 6.55790E-012
+ XTF = 3.89752E+001
+ VTF = 1.09308E+001
+ ITF = 5.21078E-001
+ CJC = 1.00353E-012
+ VJC = 3.40808E-001
+ MJC = 1.94223E-001
.ENDS
------------------------------------------------------------------------------------
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top