Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to use spectre to run THD?

Status
Not open for further replies.
T

tsinghua

Full Member level 4
Joined
Dec 30, 2003
Messages
222
Helped
23
Reputation
46
Reaction score
3
Trophy points
1,298
Activity points
1,111
how to use spectre

I am designing an opamp used in 20bit codec. But I do not know to set the parameters correctly to get the right THD (Total Harmonic Distortion). The spec requres the THD<-90dB. But the THD function applied to the output of spectre can only get about -47dB even the waveform is the idel sinusoid generated by the sine source.
Can anyone give such a simulation deck in spectre netlist to show how to set parameters correctly for right THD?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top